Buying guide · 18 November 2026
DDA compliant lifts
for accessible buildings
A DDA compliant lift is one that gives people with a disability fair, independent access to a building. There is no single DDA lift: the right type depends on the building, how far the lift travels and who uses it, and the building surveyor confirms compliance for the site. This guide is for building owners, architects, builders, schools, clubs and owners corporations in Melbourne and Geelong. It covers which of our disabled access and commercial lifts suits which job, and what to sort out before you ask for a quote. To talk about your building, book a free consultation.

What people mean by a DDA compliant lift
The Disability Discrimination Act makes it unlawful to discriminate against people with a disability, including in access to buildings. The detail sits in the Disability (Access to Premises – Buildings) Standards and the National Construction Code, which includes the Building Code of Australia. Together they set out when a building needs accessible access between levels and what that access has to provide.
A lift is only one part of that picture. Whether a lift is needed, which type is acceptable and what the car, doors and controls must provide all depend on the building's classification, its use, the number of levels and how far the lift travels. Lifts themselves are covered by the parts of the AS1735 lift standard, and different parts apply to different kinds of lift.
So a "DDA compliant lift" really means the right lift for that building, built to the right standard and installed so the building as a whole meets its access obligations. Your building surveyor or certifier makes that call for the site. This guide is general information, not legal advice.
Platform lift or full lift: the options side by side
Our accessible and commercial range covers three kinds of job: a short rise of up to 1.5 metres, a building with several levels, and access that is only needed for an event or a season. The figures below are maximums for each model.
| Model | Max travel | Rated load | Best when |
|---|---|---|---|
| Orion | 8m | up to 630kg | The building needs a lift without structural work |
| Mariner DDA | 8m | up to 630kg | Multiple levels need compliant, independent access |
| Low-Rise Series | 1.5m | up to 400kg | The rise is short — a porch, a stage, a split level |
| Mobilift | 1.5m | up to 275kg | Access is temporary, or needed by Friday |
Each model has its own page in the disabled access and commercial ranges, with photos and brochures.
Low-Rise platform lifts for short rises
A low-rise platform lift, sometimes called a vertical platform lift, is the usual answer for a short change of level: the steps up to a front entrance, a stage, a mezzanine or a split level inside a club or school.
Our Low-Rise Series covers travel of up to 1.5 metres and a rated load of up to 400 kilograms, indoors or outdoors, in open or enclosed types. There are no-pit options, which matters on an existing slab, and lead times are short. We source these lifts from global suppliers able to meet BCA and DDA compliance.
One is installed and running in our Braeside showroom. Bring the wheelchair or the scooter and try it before you decide.
Mariner DDA for buildings with several levels
Once the rise is more than a short step, a platform lift is no longer the tool. For multi-level public and commercial buildings we install the Mariner DDA, an Australian-built lift from Aussie Lifts.
The Mariner DDA gives people with a disability independent access across up to four levels. It is built to AS1735.16, with travel of up to 8 metres, a rated load of up to 630 kilograms and room for wheelchairs and mobility scooters. It suits retrofits as readily as new builds, in schools, churches, government facilities and community spaces.
The hydraulic drive needs no overhead space and no load-bearing walls on an internal install, and the lift needs a 100 millimetre pit. Its sizes are fully customisable, which makes it the one we reach for in heritage listed buildings where space is extremely limited but access is still required.
To get the feel of a Mariner DDA before you decide, ride the Phoenix in our Braeside showroom. The Phoenix is fundamentally the same lift, built for homes, without the extra DDA requirements of a returned handrail and a dual control operating panel. It gives you the same feel for the lift, and the customisation options are the same.
Orion: a small commercial lift without structural work
The Orion is the Australian-built workhorse of our commercial range, designed for commercial buildings, schools and factories. It takes up to 630 kilograms over up to 8 metres of travel, and installs without load-bearing walls. It needs a 150 millimetre pit and 2600 millimetres of headroom.
Because the shaft is self-supporting, it can be built off site and craned in. On one Melbourne commercial job an Orion was craned in and installed in two days on site. Another runs inside a custom glass shaft, so the lift is a feature as well as access.
Temporary access: Mobilift hire
Sometimes access is needed for a day, not a decade. The Mobilift is a manually operated portable wheelchair platform that sets up in under five minutes, with up to 1.5 metres of travel and a rated load of up to 275 kilograms. It is available for short or long term hire for events and temporary installations, and is delivered to Geelong as well as Melbourne venues. At the AFL Big Freeze in Melbourne it gave wheelchair users access from the concourse to field level, installed on the day.
Questions to answer before you ask for a quote
Most of these decide the model before anything else does.
- Travel and levels. How far is it from the lowest landing to the highest, and how many levels must the lift serve? Up to 1.5 metres points to a platform lift; more than that, or several floors, points to Mariner DDA or Orion.
- Indoors or outdoors. The Low-Rise comes in indoor and outdoor versions, so an entrance stair outside the building is often workable.
- Existing building or new build. In a new build the shaft, slab and landings can be drawn around the lift. In an existing building we work with what is there; if an old lift is already in place, retrofit and replacement can often fit the existing shaft without major structural changes.
- Space and pit. How much floor area is free at each level, and can the slab take a pit? The Low-Rise has no-pit options, Mariner DDA needs 100 millimetres and Orion 150 millimetres.
- Doors and landings. Work out where people approach the lift on each level, which way the doors need to open, and how much clear space there is in front of each landing.
- Power. Your project manager confirms the power supply needed for the model chosen, and where it will come from.
- Who uses it. Think about wheelchairs, scooters, prams, carers and goods. Users set the minimum platform or car size, so put them in the brief from the start.
- Servicing. Decide who will look after the lift once it is handed over, and how that is budgeted.
Standards, certification and servicing
Our consultation service includes guidance on Australian lift standards. Where the building needs them, site-specific shaft and structural drawings are issued to your surveyor. Installation ends with testing, certification and handover.
A public lift needs regular servicing to stay safe and compliant: we recommend six monthly services for residential lifts, and quarterly servicing for public lifts. Our maintenance agreements come in three levels: Compliance, Standard and Comprehensive, with 24/7 emergency call-out from Southern Lifts technicians. Parts for SWIFT, Aussie Lifts and Area Lifting are stocked in Melbourne.
If the lift is for a private home rather than a building open to the public, start with our residential lifts instead. For NDIS questions, see our NDIS page; this guide does not cover funding.
Next steps
The first consultation is free, at our showroom at 2/226 Governor Rd, Braeside VIC 3195 or on site. A Low-Rise platform and a Phoenix are installed and running there, so in one visit you can try a short-rise platform and get the feel of a Mariner DDA. We are open Monday to Friday 7:00–4:30, with Saturdays by appointment.
We work on buildings across Melbourne and Geelong. Bring the drawings, the number of levels and who will use the lift. To start, contact Southern Lifts or call 1300 580 000.
Questions about DDA compliant lifts
What is a DDA compliant lift?
A lift that, as part of the building, gives people with a disability fair and independent access between levels under the Disability Discrimination Act, the Premises Standards and the National Construction Code. The right type depends on the building, travel and use, and the building surveyor confirms compliance for the site.
What is a low-rise platform lift?
A lift for a short change of level, such as entrance steps, a stage or a split level. Our Low-Rise Series covers up to 1.5 metres of travel and up to 400 kilograms, indoors or outdoors, with no-pit options.
Which lift do I need for a building with more than two levels?
A platform lift is for short rises. For several levels we install the Mariner DDA or the Orion. Both travel up to 8 metres and take up to 630 kilograms. A consultation narrows it to one.
Can you add a lift to an existing building?
Often, yes. The Mariner DDA suits retrofits as readily as new builds, it and the Orion both install without load-bearing walls, and the Low-Rise has no-pit options. If an old lift is there, see retrofit and replacement.
Can we hire a wheelchair lift for an event?
Yes. The Mobilift is a portable, manually operated platform that sets up in under five minutes, available for short or long term hire.
Pages that go further
- Disabled access liftsMariner DDA, the Low-Rise platform and Mobilift hire.
- Commercial liftsThe Orion and the rest of the commercial range, up to 630 kilograms.
- Low-Rise platform liftUp to 1.5 metres of travel, indoors or out, with no-pit options.
- Mariner DDAIndependent access across multiple levels, to AS1735.16.
- Mobilift hireA portable platform for events and temporary access.
- Retrofit and replacementExisting buildings, and shafts that are already there.
- MaintenanceCompliance, Standard or Comprehensive, plus 24/7 call-out.
- Lifts in MelbourneThe Braeside showroom and the Melbourne jobs on this site.
- Lifts in GeelongHome, commercial and disabled access lifts for Geelong.
- Book a consultationFree, in the Braeside showroom or on site.
Get a quote for your building
Free consultation in the Braeside showroom or at your property. 2/226 Governor Rd, Braeside VIC 3195. 1300 580 000.